BMPMG - GREEN LOW VOC FLAT EPOXY PART A
- MSDS: BMPMG
- Manufacturer: EVERSEAL MFG CO INC
- Product Name: GREEN LOW VOC FLAT EPOXY PART A
- National Stock Number: 8010-00N025385
Product Identification
Product ID:GREEN LOW VOC FLAT EPOXY PART A
MSDS Date:09/16/1988
FSC:8010
NIIN:00N025385
Kit Part:Y
MSDS Number: BMPMG
Responsible Party
RIDGEFIELD, NJ 07657
US
Emergency Phone: 201-943-4986
Info Phone: 201-943-4986
Preparer: FRANK PRIMERANO
Cage: 72988
Contractor
Telephone: 201-943-4986
Cage: 72988
Ingredients
68410-23-1, 68910-93-0).
Fraction By Weight: 9%
IRON OXIDE
CAS: 1309-37-1
RTECS: NO7400000
Fraction By Weight: 10%
OSHA PEL 10 MG/M3 (FE)
ACGIH TLV: 5 MG/M3(FE),B2; 9293
68855-54-9)
Fraction By Weight: 7%
OSHA PEL 6 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
SILICA, CRYSTALLINE - QUARTZ; (SILICON DIOXIDE)
CAS: 14808-60-7
RTECS: VV7330000
Fraction By Weight: 20%
OSHA PEL SEE TABLE Z3
ACGIH TLV: 0.1 MG/M3 RDUST;9293
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: 2%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3
CERAMIC SPHERES
Fraction By Weight: 17%
3); (ZINC PHOSPHATE)
CAS: 7779-90-0
RTECS: TD0590000
Fraction By Weight: 15%
(ORAL) 4.3 G/KG
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 2%
OSHA PEL 100 PPM;150 PPM STEL
ACGIH TLV: 100 PPM;150 PPM STEL
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
15.
CAS: 108-10-1
RTECS: SA9275000
Fraction By Weight: 11%
OSHA PEL 100 PPM/75 STEL
ACGIH TLV: 50 PPM/75 STEL; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
4.5.
CAS: 110-12-3
RTECS: MP3850000
Fraction By Weight: 5%
OSHA PEL 100 PPM
ACGIH TLV: 50 PPM; 9293
ADDITIVES
Fraction By Weight: 2%
Hazards
LD50 LC50 Mixture:SEE INGREDIENTS
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHAL: DIZZINESS, NAUSEA, POSSIBLE
UNCONSCIOUSNESS. SKIN & EYES: POSSIBLE SENSITIZER. PROLONGED AND/OR
EXCESSIVE EXPOSURE TO DUST FROM SANDING, GRINDING OR BLASTING MAY
CAUSE LUNG DISORDERS.
Explanation of Carcinogenicity:CRYSTALLINE SILICA (SILICON DIOXIDE):
GROUP 2A (IARC); NTP GROUP 2.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL: REMOVE TO FRESH AIR. APPLY ARTIFICIAL RESPIRATION IF
NEEDED. SKIN: WASH WITH SOAP & WATER. EYES: FLUSH WITH WATER FOR AT
LEAST 15 MINUTES. CONSULT PHYSICIAN. INGEST: CALL MD IMMEDIATELY .
Fire Fighting
Flash Point:60.0F,15.6C
Lower Limits:1.0%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WATER NOT A SUITABLE EXTINGUISHING
MEDIUM.
Accidental Release
Spill Release Procedures:ENSURE ADEQUATE VENTILATION. REMOVE IGNITION
SOURCES. ABSORB SMALL SPILLS ON DRY ABSORPTION MATERIALS. USE
SPARK-PROOF SCOOP FOR LARGER SPILLS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID EXCESSIVE HEATING. KEEP FROM
OPEN IGNITION SOURCES.
Other Precautions:NPCA/HMIS RATING 3,3,O,H. OPERATORS SHOULD WEAR
APPROPRIATE PROTECTIVE GEAR ON EXPOSURE TO DUST FROM SANDING,
GRINDING OR BLASTING.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED VAPOR CARTRIDGE MASK OR AIR-
SUPPLIED HOOD.
Ventilation:SUFFICIENT TO ENSURE LEL NOT ACHIEVED.
Protective Gloves:IMPERVIOUS GLOVES RECOMMENDED.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECT SKIN WITH CLOTHING OR BARRIER CREAM.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:241F,116C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Spec Gravity:1.79
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:39
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NOT APPLICABLE.
Hazardous Decomposition Products:CO & CO2 ON COMBUSTION.
Disposal
Waste Disposal Methods:DISPOSE OF AS HAZARDOUS WASTE PER LOCAL, STATE
AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.